Nitrile Hydraulic Accumulator Bladder

    Dongfang Yoyik supplies Nitrile Rubber Hydraulic accumulator bladder, designed for high-pressure hydraulic systems, with high-quality carbon steel and stainless steel, with pressures from 70 to 690 bar, available in a variety of volume sizes. Suitable for all kinds of working media, such as petroleum-based hydraulic oil, emulsion, water-glycol and so on. Our accumulators are available with flanged and high flow connection, as well as standard accessories, O-rings and inflatable tools. Strict factory testing, the use of safety valve blocks, rupture discs and other accessories to ensure the safe installation and operation of the accumulator, providing a safe and reliable management solution for many hydraulic system applications.
Precautions for the use of bladder accumulators:
    1. The joint connected with the inlet valve should be careful that the size of the inner hole of the screwed end should not be too small to prevent the stem from catching the joint and causing the capsule to be broken.
    2. The inflatable tool is selected from the original model. When inflating, pay attention to slowly open the cylinder valve. The speed of the inflation is easy to cause the skin to be pinched by the mushroom valve.
    3. When repairing the accumulator, you must first release the pressure and discharge the nitrogen in the skin capsule before disassembling.

Bladder Type Accumulator Nitrile Hydraulic Accumulator Nitrile Hydraulic Bladder Accumulator Nitrile Hydraulic Accumulator Bladder